CCNP2 - Cisco Certified Network Professional
Remote Access
Module 1: Wide-Area Networks
1.1
Remote Access
1.2
Selecting Appropriate WAN Technologies
1.3
Selecting Cisco Remote Access Solutions
1.4
Selecting Site Specific WAN Components
1.5
Basic Router Configuration Lab Exercises
Module 2: Modems and Asynchronous Dialup
Connections
2.1
Modem Functions
2.2
Configuring Asynchronous Interfaces and Terminal Lines
2.3
Modem Configuration
2.4
Verifying modem configuration
2.5
Configuring an Asynchronous Dialup Connection Lab Exercises
Module 3: PPP Overview
3.1 PPP
Overview
3.2 PPP
Authentication
3.3 PPP
Callback
3.4 PPP
Compression
3.5 PPP
Multilink
3.6
Verifying PPP Configuration
3.7
Configuring PPP Lab Exercises
Module 4: ISDN and DDR
4.1 ISDN
Architecture
4.2 ISDN
Protocol Layers
4.3
Configuring ISDN BRI
4.4
Configuring Dial-on-Demand Routing (DDR)
4.5
Static and Default Routing
4.6
Optional Configurations
4.7
Monitoring the ISDN Interface
4.8
Configuring ISDN PRI
4.9
Configuring ISDN Lab Exercises
Module
5: Dialer Profiles
5.1
Legacy DDR
5.2
Dialer Profiles
5.3
Dialer Profiles Lab Exercises
Module 6: Frame Relay
6.1
Frame Relay Concepts
6.2
Configuring Frame Relay
6.3
Frame Relay Topologies
6.4
Configuring Frame Relay Lab Exercises
Module 7: Managing Frame Relay Traffic
7.1
Frame relay Traffic Shaping
7.2 On
Demand Routing
7.3
Frame Relay Traffic Shaping Lab Exercises
Module 8: WAN Backup
8.1 Dial
Backup
8.2
Backup Interface Operations
8.3
Routing with the Load-Backup Feature
8.4
Verifying Dial Backup Configuration
8.5
Floating Static Routes
8.6
Dialer Watch
8.7
Configuring Dialer Backup Lab Exercises
Module 9: Managing Network Performance with
Queuing and Compression
9.1
Queuing
9.2
Configuring Weighted Fair Queuing
9.3
Class-Based Weighted Fair Queuing
9.4
Configuring Low Latency Queuing (LLQ)
9.5
Verifying Queuing Operation
9.6
Optimizing Traffic Flow with Data Compression
9.7
Configuring Data Compression
9.8
Managing Network Performance Lab Exercises
Module 10: Scaling IP Addresses with NAT
10.1 NAT
Overview
10.2
Configuring NAT
10.3
Verifying NAT Configuration
10.4 NAT
Considerations
10.5
Configuring NAT Lab Exercises
Module 11: Using AAA to Scale Access
Control
11.1 AAA
Overview
11.2
Configuring AAA
11.3 AAA
Authorization Lab Exercises
Module 12: Broadband Connections
12.1
Broadband Overview
12.2
Cable Technology
12.3 DSL
Technology
12.4
Configuring the CPE as the PPPoE Client
12.5
Configuring DSL with PPPoA
12.6
Troubleshooting DSL
Module 13: Virtual Private Networks
13.1 VPN
Overview: Types, Tunnels and Terms
13.2
Cisco IOS Cryptosystem Overview
13.3
IPSec Technologies
13.4
Task 1 – Prepare for IKE and IPSec
13.5
Task 2 – Configure IKE
13.6
Task 3 – Configure IPSec
13.7
Task 4 – Test and Verify IPSec
13.8
Configuring a Site-to-Site IPSec VPN Lab Exercises
|
